Liquid ring Vacuum pump- Collecteur DN 24″ ( 12 pcs in A995 Gr.1B- Duplex)
Asimer group completes the machining of 12 Collecteurs for Liquid Ring Vacuum pump, in A995 Gr. 1B (Duplex), in its Trevisan DS900. A liquid-ring pump is a rotating positive-displacement gas pump, with liquid under centrifugal force acting as a seal. They are typically applied as a vacuum pump, but can also be used as a gas compressor. Liquid-ring pumps are typically powered by an induction motor and the function of a liquid-ring pump is similar to a rotary vane pump. These pumps are an inherently low-friction design, with the rotor being the only moving part. Sliding friction is limited to the shaft seals. APPLICATIONS: •Aircraft Industry: Carburetor testing; altitude chamber work; vacuum filling of fluids; vacuum chucking for holding and handling parts. •Automobile Industry: Engine testing, carburetor testing; vacuum filling of power steering and brake fluid. •Chemical Industry: Vacuum on chemical reactors and other processes; vacuum de-aeration of caustic solutions; vacuum exhausting on resin kettles; vacuum filtration. •Concrete Industry: Vacuum lifting and de-aeration of pre-cast concrete slabs. •Gas Industry: Vacuum drying of oxygen cylinders; evacuation of old gas cylinders using vacuum before filling. •Petroleum Industry: Vapor recovery from storage tanks, vacuum priming of pumps; vacuum cleaning and filling of barrels; vacuum filtration for dewaxing. •Water Treatment Industry: Air agitation for the purpose of oxidizing bacteria; de-aeration to reduce corrosion within distribution systems and provide clear water.